Получить консультацию
Оставьте свои данные, и мы вам перезвоним.
CRP-STC-100x70
Description:
Coiled tubing ram blowout preventer CRP-STC-100x70 for well workover using advanced technology using continuous coiled tubing.
CRP is used as part of wellhead equipment, for sealing the mouth of oil and gas wells during their repair, development and drilling, using a string of a continuous flexible steel pipe or a string of a flexible continuous steel-polymer pipe, to prevent oil and gas water showings and open fountains, in order to ensure safe work, subsoil and environmental protection.
BOP type - ram, four-row with a side outlet and a port for a media separator.
The drive of the dies is hydraulic with mechanical fixation of the closed position of the dies and the possibility of manual control of the dies.
Technical details:
Nominal bore, mm - 100
Working pressure, MPa - 70
Test pressure of body parts for strength, MPa - 105
Side outlet diameter, mm - 52
Working pressure in the hydraulic drive of the dies, MPa - 10.5
Maximum pressure in the hydraulic drive of the dies, MPa - 21
Diameter of pipes to be sealed, mm - 25.4 - 60.3
Connecting dimensions of flanges - 100x70 GOST 28919-91
Overall dimensions (length x width x height), mm - 1980 x 552 x 1170
Weight, kg - 1515
Corrosion-resistant design - GOST 13862-90 K1 and K2
The drive of the dies is hydraulic with mechanical fixation of the closed position of the dies and the possibility of manual control of the dies.
Coiled tubing ram blowout preventer CRP-STC-100x70 for well workover using advanced technology using continuous coiled tubing.
CRP is used as part of wellhead equipment, for sealing the mouth of oil and gas wells during their repair, development and drilling, using a string of a continuous flexible steel pipe or a string of a flexible continuous steel-polymer pipe, to prevent oil and gas water showings and open fountains, in order to ensure safe work, subsoil and environmental protection.
BOP type - ram, four-row with a side outlet and a port for a media separator.
The drive of the dies is hydraulic with mechanical fixation of the closed position of the dies and the possibility of manual control of the dies.
Technical details:
Nominal bore, mm - 100
Working pressure, MPa - 70
Test pressure of body parts for strength, MPa - 105
Side outlet diameter, mm - 52
Working pressure in the hydraulic drive of the dies, MPa - 10.5
Maximum pressure in the hydraulic drive of the dies, MPa - 21
Diameter of pipes to be sealed, mm - 25.4 - 60.3
Connecting dimensions of flanges - 100x70 GOST 28919-91
Overall dimensions (length x width x height), mm - 1980 x 552 x 1170
Weight, kg - 1515
Corrosion-resistant design - GOST 13862-90 K1 and K2
The drive of the dies is hydraulic with mechanical fixation of the closed position of the dies and the possibility of manual control of the dies.